Dell DSDPS-200 Question Answer

According to Dell recommendations, when should a firmware update be performed on a PS Series group?

A. Firmware upgrades should be performed on the weekends.
B. Firmware updates should be done during low I/O periods.
C. Firmware updates must always be done during a maintenance window.
D. Firmware upgrades may be performed during any I/O period.

Answer: B



A VMware administrator requests the creation of a 100 GB volume to use as a datastore on an ESX environment. The SAN administrator completes the request. For a few days, the VMware administrator is able to access and use the datastore. The VMware administrator then reports that the VM located on the datastore is greyed out and labelled as inaccessible. What are three possible reasons for this problem? (Choose three.)

A. The SAN administrator has NOT set the datastore access policy.
B. The SAN administrator recently upgraded firmware revision on the array.
C. The SAN administrator has changed and set an inaccess policy.
D. The SAN administrator set the datastore volume as “Read Only”.
E. The ESXi host is unable to ping the Storage group.

Answer: BCE

Dell DSDPS-200 Question Answer

A new storage administrator (SA) is configuring replication on a newly created 1 TB volume.
Management determines that asynchronous replication will be used.
The SA looks at the delegated space on the DR group and determines that there is NOT enough room to fit the replica set for the new volume.
Which action should the SA take at the DR site so that the new volume can be replicated?

A. Increase the delegated space.
B. Reduce the replica reserve on replicated volumes.
C. Reduce the volume by thin provisioning.
D. Increase the replica reserve on the new volume.

Answer: D

Dell’s New Laser Projector Offers A 100-inch 4K HDR Display

If you dream of an 80-inch and 4K television but shout at the idea of ​​spending $ 10,000 and more, Dell has a new laser projector that could be the perfect solution. Nicknamed the Dell Advanced 4K Laser Projector, the device offers a huge 4-inch 100-inch display with HDR support. Add in the fact that it can be placed very close to a wall as long as you have the flat surface space you are ready to go.

Dell notes that the projector is designed primarily for use in office or class situations, where a 100-inch display is useful for presenting to a large number of people. However, it offers several advantages that make it a perfect fit for a living room as well. The projectors often have to be placed several feet from the wall they are showing, but this model is ultra-short shot, which means you only need 4 inches of space between the wall to produce that 4 inch image of 100 inches .

Another advantage is the simple fact that it uses a laser instead of a bulb, an expensive component that needs to be replaced from time to time in other projectors. Dell promises that with eight hours of use five days a week will have a lifespan of at least 10 years. With much less daily use in a home environment, it is easy to imagine using the projector for much longer.

Other tidbits include a refresh rate of 120hz and the ability to project content from four different entries over a network connection. There is also Bluetooth support for wireless audio output and a USB port for playing media directly from the device. Dell says the advanced 4K laser projector will be priced at $ 5,999 and is expected to go on sale in the United States starting July 19.

Dell DSDPS-200 Question Answer

A customer reports that a problematic array is acting up. The customer is able to open SAN HQ and provide a SAN HQ archive, but is unable to get to the Group manager GUI to initiate a diag log pull. The customer tries to use the Group IP address via FTP to retrieve previous diagnostic files, but that is also unsuccessful. What other option should the customer use to retrieve logs?

A. SNMP transfer
B. Email delivery
C. Dump to console
D. Use HTTPS option

Answer: B


Which four PC arrays support Vertical Port Failover? (Choose four.)

A. 6510
B. 5500
C. 6610
D. 6100
E. 4210
F. 6210

Answer: C,D,E,F

Dell DSDPS-200 Question Answer

An engineer needs to migrate a volume from a live production pool to a newly created pool, but is unable to do so. What must the engineer do before the migration can start?

A. Offline the volume before migrating.
B. Disconnect active iSCSI sessions to the volume
C. Disable encryption on the group
D. Add or move a member to the new pool.

Answer: D

Dell DSDPS-200 Question Answer

A Group Manager sees only one connection for a volume connected to a 2012 host that runs two iSCSI NICs. What are three possible causes of this problem? (Choose three.)

A. The second iSCSI NIC doesNOThave flow control enabled.
B. The second iSCSI NIC doesNOThave Jumbo Frames enabled.
C. Multi-pathing was NOT applied on the initial connection.
D. Access control is set up for a single IP.
E. The second NIC does NOT have cable connected.

Answer: B,C,D



An engineer is creating snapshot schedules for a volume to protect against data corruption. Snapshots must be taken both hourly and nightly. Each schedule is configured for a max keep of 10. Snapshot borrowing is enabled. The default snapshot schedule has NOT been disabled.
What should be the expected max number of snapshots for this volume?

A. 20
B. 21
C. 10
D. 2

Answer: A

Dell DSDPS-200 Practice Test Questions Dumps

Dell DSDPS-200 Test PDF Questions